DIN size refers to the size of the stereo’s chassis, and car stereos come in two standard sizes: Single-DIN refers to stereos that are two inches tall (and seven inches wide) Double-DIN refers to stereos that are four inches tall (and seven inches wide)
If it measures roughly 7 inches long by 2 inches tall, then it’s a single DIN head unit, and you have to replace it with another single DIN unit. If your radio measures roughly 7 inches long by 4 inches tall, then it’s double DIN.
Single DIN Vs Double DIN Sound Quality
When it comes to sound quality, there is little to no difference between the single DIN and double DIN head unit. The real difference between the two receivers is in the size of the display and the features that can be added to the stereo system because of the size.
Most cars have single DIN stereo slots. The measurement of a standard DIN slot is 2-1/8” (50mm) height by 7-1/8” (180mm) width. Most car radios will slide directly into the single DIN slot without requiring an additional adapter kit. However, some DIN models may require an installation kit.
Are all double din radios the same size? No, not all double din radios are the same size. They come in many different shapes and sizes, so it’s important that you get one that will fit into your car.
If your car has a double-DIN opening you can typically fit both single-DIN and double-DIN units in it. You’ll just need to purchase the correct dash kit depending on the size you choose. Double-DIN openings are great for units like Multimedia/DVD, GPS, and other units that have a large display.
The double-DIN (also called 2-DIN) standard implies that a unit has double the height of a standard DIN radio at 180 by 100 mm, or roughly 7 by 4 inches.
Most aftermarket radios are single DIN which have face dimensions of 50mm (2 inches) tall by 180mm (7 inches) wide. A double DIN is twice as tall and the same width. The radios do vary in depth and it is very important that you know if the radio you want will fit in your dash.
Yes, it can easily be installed by anyone. Its a very easy DIY. But you will need the 2 Din Facia plate to install the Touchscreen infotainment system in-place of the old music system.
You will sometimes find the same plug on different aftermarket units of the same brand, but there is no guarantee the pins in the connector are mapped the same. When in doubt, buy a vehicle specific radio installation harness for your vehicle, and match up the colours with that of the aftermarket radio harness.
It is safe to say that you will always need to obtain a dash kit. … A dash kit is a must if you are converting from a single DIN unit to a double DIN one (or vice versa). An example of a vehicle-specific dash kit.
It is a good radio on a budget that has several features that make it flexible for several types of users. In all honesty I may replace the unit with a different brand, not because I have anything negative about this brand or radio, but I would like additional features that this unit doesn’t have.
Crutchfield has a consumer rating of 4.76 stars from 1,580 reviews indicating that most customers are generally satisfied with their purchases. Consumers satisfied with Crutchfield most frequently mention customer service, car stereo and wiring harness. Crutchfield ranks 11th among Electronics sites.
In general, though, we are impressed with the ease of pairing, ease of calling, and sound quality of the Bluetooth interface. The Dual XDMA6700 is an inexpensive, good-looking car stereo with a great Bluetooth interface. Its music playback functionality, however, leaves far more to be desired.
If your vehicle has (or once had) a factory stereo, or if it was pre-wired with a “stereo prep” package, there should be at least one plastic wiring harness behind the stereo opening. This plug connects the stereo to your vehicle’s electrical system and the speakers.
Some car shops and electronic stores will be extremely cheap, while others will be thoroughly expensive. Typically, though, the cost ranges from $25 to $100. If you install the radio manually, the price may go below $25.
|Single DIN||2 inches||7 inches|
|Double DIN||4 inches||7 inches|
|1.5 DIN (Din-and-a-half)||3 inches||7 inches|
Use the overall height, measuring from the inside of the bezel (the trim that surrounds the stereo to decoratively conceal gaps between the bodywork) if the radio is still installed in the dash. Note: Head units generally come in either single DIN (180 x 50 mm panel) or double DIN (180 x 100 mm panel) size.
ISO 7736 is a standard size for dashboard mounted head units, for car audio. It was originally established by the German national organization for standardization, the Deutsches Institut für Normung, as DIN 75490, and is therefore commonly referred to as the DIN size.
ST toggles between Stereo and Mono. LOC is for local or DX (distant) frequency handling.
|Type of Auto Shop||Hourly Rate||Flat Fee (Install)|
|Indepant Auto Shop||$70 – $90||N/A|
Installing a new car stereo can often be simple enough to do yourself, and his article will provide you with a general guide on how to do it. Keep in mind that some cars and systems are more complicated than others and that every car and stereo system will be different, so some specifics may vary.
single din vs double din
single din vs double din sound quality
single din pocket
what din size is my car
1.5 din radio
best single din car stereo
how to install a double din stereo in a single din
single din apple carplay