To relieve itchy skin, turn a hair dryer on a cool setting and aim it under the cast. Don’t allow your child to stick objects, such as a coat hanger, inside the cast to scratch his or her skin.
Not only can they get stuck inside, but scratching the skin under a cast can lead to infection and other cast complications.
It can be maddening if you can’t reach a spot you need to scratch. Locate your itch, and tap it on the outside of the cast. You can also try blowing cool air from a hair dryer around the edges of the cast. Don’t give into temptation and stick a pencil, a ruler, or any other objects inside the cast to relieve the itch.
Itching beneath a cast likely occurs due to moisture build-up. Depending on how long you wear a cast for, they can get very hot and often sweaty over time. Therefore, your skin can become irritated and drive you to take risks. It can sometimes get unbearable!
Don’t allow your child to stick objects, such as a coat hanger, inside the cast to scratch his or her skin. This could cause an injury or infection.
Always remove any covering as soon as you can to avoid causing sweating, which could also damage the cast. Even if the plaster cast makes your skin feel very itchy, do not poke anything underneath it. This could cause a nasty sore and lead to infection.
The skin under the cast can get itchy. Never put anything down into the cast to scratch. For itchiness, use a hair dryer on a cool, low setting and blow air into the cast. You may use diphenhydramine (Benadryl) for itching.
During this “remodeling”, the body can straighten the fractured bone by laying new bone on the inside edge, and taking away bone on the outside of the angled area. In young children, bones can remodel fairly large angles, healing to appear completely normal within one to two years.
Don’t put talcum powder or corn starch inside the cast – these may start a skin infection. The best treatment is to dry the inside of the cast with a hair drier. Cast rubs or presses against your skin and causes irritation.
Myth #9: Wounds itch when healing
We all know the feeling: some time after an injury, the affected area will begin to tingle and itch. This goes especially for superficial wounds. And yes – in fact, this itching may indicate that the healing process is well on its way.
Putting a cast on properly can be tricky. This is because the doctor needs to balance the need for a sturdy and tight fit to keep the fractured bone from shifting during the healing process, but also not casting it too tight to cause damage to the limb.
Splints, also known as half-casts, provide less support than casts, but are faster and easier to use. They also can be tightened or loosened easily if the swelling in the arm or leg increases or decreases. Ready-made or off-the-shelf splints are available in many different sizes and shapes.
Extreme Swelling/Tightness/Pain in Cast: This can be the result of swelling inside the cast. Burning, Stinging, or Skin Irritation: This can be caused by too much pressure on the skin or by a wet cast.
Don’t take your cast off.
Removing your cast not only hinders healing, but it can also cause injury. Casts are durable. Your healthcare provider has a special tool that vibrates through the cast but does not cut the skin or padding underneath.
Oral antihistamines may relieve the itching. Nondrowsy oral antihistamines include fexofenadine (Allegra) and loratadine (Claritin). Antihistamines like diphenhydramine (Benadryl) or chlorpheniramine (Chlor-Trimeton) are less expensive but can make you feel sleepy.
DON’T get non-waterproof casts wet.
If conventional padding inside a cast gets wet, it won’t dry. Neither will the skin next to it. That can cause significant problems, including skin infection, skin death and permanent scarring, Dr. Goodwin says.
As the broken toe is healing, it might start to itch. This is due to your body releasing histamines to the area during the inflammatory phase of healing.
When you touch the fractured area, the pain will lessen as the fracture gets more solid. So, one way to tell if the broken bone is healed is for the doctor to examine you – if the bone doesn’t hurt when he touches it, and it’s been about six weeks since you broke it, the bone is most likely healed.
The skin under the plaster cast is subjected to tiny amounts of friction as the cast moves. The friction is not enough to rub away hair, but it is enough to stimulate the hair follicles in the skin to produce new hairs. As the skin is subjected to its normal wear and tear, the excessive hair will gradually disappear.
Also, please do not put talcum powder or corn starch inside the cast. These can cause skin irritation. … Be sure to put a towel down first to keep the cast dry. Do not cut, trim, or shave any area of the cast because this may weaken or break the cast.
Stinging or burning, which could mean there is too much pressure on your skin. Excessive swelling in the part of your arm or leg that is below the cast, which could mean your blood is circulating too slowly. Bleeding from the skin underneath cast, which means the skin has broken.
Only use the cool setting—warm air can damage the cast. A bike pump can also do in a pinch. Minimize moisture and sweating. Excess moisture can worsen cast itch, so limit heat and follow the above tips for keeping your cast dry.
A handful of studies have found that when wounds are kept moist and covered, blood vessels regenerate faster and the number of cells that cause inflammation drop more rapidly than they do in wounds allowed to air out. It is best to keep a wound moist and covered for at least five days.
Related Searches
itchy cast hacks
alternatives to wearing a cast
rash from cast
how to sleep with a cast on leg
cast cooler
antihistamine for itchy cast
how to treat a rash from a cast
cast scratcher walmart