It uses dual 0.080-inch cutting lines on a 17-inch diameter head. This Homelite 26-cc, gas curved shaft string trimmer has a curved shaft and weighs 10.2 lbs. It uses dual 0.080-inch cutting lines on a 17-inch diameter head.
Hold the string head if the cover has a nut in its center. If the nut is black, unscrew the nut by turning it counterclockwise. If the nut is red, turn it clockwise to unscrew it. Lift the cover off the head after removing the nut.
The Husqvarna 125L has a straight shaft, making it easy to use the machine as an edger — you simply turn it over and hold it at a slight angle. When you need to restring the trimmer, use 0.095- to 0.106-inch trimmer line.
The Automatic Feed Spool (AFS) is the technologically advanced line feed system found on Black & Decker string trimmer products. Using centrifugal force, the system monitors the amount of line being used and feeds more line automatically as the cutting line shortens.
“The Weed King,” as Ballas came to be known, eventually went on to sell Weed Eater to Emerson Electric Co., which later merged with Poulan, and was acquired by the Husqvarna Group in 1986. Today, the Weed Eater brand encompasses not only string trimmers, but also mowers, hedge trimmers, and blowers.
The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the string trimmer for a long period of time. … If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.
|Arnold Maxi Edge||Length: 100 Feet Diameter: 0.095 Inch Shape: Six-Sided|
|Oregon Magnum Gatorline||Length: 685 Feet Diameter: 0.095 Inch Shape: Square|
|LoNoiz||Length: 315 Feet Diameter: 0.130 Inch Shape: Spiral|
String Trimmer Line Thickness
This probably comes as no surprise to anyone, but the general rule with string trimmer line is that the tougher the application, the thicker the line needs to be. A larger diameter will increase the power and durability of the line, which leads to less breakage and wear-out.
|Greenworks 065-Inch Single Line String Trimmer Replacement Spool 3-Pack 29252||See On Amazon|
|Oregon 22-895 Magnum Gatorline Square Trimmer Line .095-Inch by 685-Foot||See On Amazon|
|Arnold .065-Inch Maxi-Edge Commercial Trimmer Line||See On Amazon|
Pull the trimmer line spool out of the trimmer head. Observe your trimmer head to see if it has a small hole in the inner and outer portions. If so, insert a small Phillips screwdriver into the two holes to hold it in position, remove the center nut with an adjustable wrench and pull the head off.
Grasp the trimmer head with one hand and turn it clockwise to loosen it. It has reverse — or left-handed — threads.
The standard string for the TrimCut head is 0.105 inches in diameter, but you can install 0.095-inch string on this head. Some versions of the AutoCut head use 0.095- to 0.105-inch string, and some use 0.080- to 0.095-inch string; check the user’s manual for the trimmer head if you aren’t sure about yours.
how to string a weed eater with two holes
weed eater string replacement
how to refill trimmer line
how to string a weed eater husqvarna
how to string a craftsman weed eater with two holes
weed wacker string home depot
weed eater string alternative
weed wacker string sizes