The thermal paper consists of base paper and a few special coating layers. On the surface side (the recording side), the precoat layer and the thermal layer are coated.
Lift up the lip on the front of the printer to open the paper roll cover. Lift the purple tab to open the auto-cutter. Remove the receipt printer ink cartridge. Replace with a new ink cartridge.
As mentioned above, thermal paper has a chemical coating on its surface, when you scratch the paper surface with your fingernail, there is heat generated in this process, and the thermal paper can show the black marks on its surface. It’s the easiest way to identify if it is thermal paper.
|GSM||Min Price||Max Price|
|80 – 120 GSM||Rs 10/Roll||Rs 45/Roll|
|Less than 80 GSM||Rs 7/Roll||Rs 70/Roll|
Prepare a stack of paper for loading by first flexing and fanning the pages. Straighten the edges of the stack on a level surface. Squeeze the guide tab on the right-hand side and slide the side guides to the outside of the tray. Adjust the rear paper guide for the size of print media you will be loading.
Lay the receipt down flat on top of the paper towels and directly in the center of them. Pour fingernail polish remover onto a cotton ball and carefully dab it over the ink on the receipt. Dab all over the ink until it has faded away. Be careful not to push too hard or the receipt will rip.
If your terminal is printing blank: Check to see if the paper roll is inserted correctly. If it’s inserted incorrectly, it will print blank due to the thermal paper. Open the printer cover, drop the paper roll into the paper holder with paper coming out of the bottom of the roll towards print head.
how to change receipt paper in a cash register
how to change receipt paper epson
how to change receipt paper star tsp100
how to refill epson receipt printer
how to put receipt paper in casio cash register