# how many strands of christmas lights do i need for my house

## How Many Strands Of Christmas Lights Do I Need For My House?

General Rule: Plan for approximately 100 mini Christmas tree lights per vertical foot-and-a-half of tree. Strands with a 4-inch bulb spacing will light more area at a lower cost.

## How do you measure Christmas lights on a house?

The most accurate method: Use a measuring tape.

Pretty simple, measure along the roofline either directly at the edge between two people on ladders, along the ground under the roofline, or while walking along the ground with a rolling measure under the roofline edge.

## How many string lights do I need calculator?

String Lights

For columns or trees, measure once around and multiply that by how many times you’ll wind your light around. Once you determine the total length, divide that by the length of a single strand for the quantity you’ll need to purchase.

## How many feet of string lights do I need?

The good news is that you don’t need complex math to solve this problem. Simply buy string lights that are 2 to 6 feet longer than your linear measurement to create the swag of your choice. It’s always better to have more string length than you need because you can always shorten it by doubling it up on the ends.

## How many lights do I need for House?

How many lights do I need to outline my roof? The long and most accurate answer is measure and calculate your required linear footage along your roofline and gutters. The easy answer is, if you don’t want to take time to measure, start with 200 feet of lights and add on if you need to.

## How long is a typical strand of Christmas lights?

diameter) are most commonly used and C9 light strings (1-1/8 in diameter) are also used for a truly bright display. Most C7 and C9 strings are 25 ft. long, so an average home (with a 100 ft. roof) will use at least 4 strings.

## How many lights do I need?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.

## How many strands of lights can you connect?

In this case, most traditional incandescent Christmas mini lights only allow you to connect 4 or 5 sets end to end but with many LED mini light strings you can connect 40 to 50+ together depending on the light count. Consider your circuits: Most household circuits are 15 or 20 amps.

## How long should Christmas lights be on a 6ft tree?

For example: for a standard 6-foot tree, you’re looking at 600 mini lights, while an 8-foot Alaskan Fir may need 1,000 mini lights. And for those of you with a 20-foot tree, be prepared to use 2,000 mini lights.

## How long should lights be on a 7ft Christmas tree?

How Many Lights Do I Need For A 7ft Tree? We recommend 15 metres of lights for a 6ft Christmas tree, but if you have space for a larger tree, for every extra foot of height simply add another 5 metres of lights. So for a 7ft tree, we would suggest using 20 metres of lights.

## What do you do with extra length of string lights?

The best way to shorten lights wired in series is to remove an entire series section of lights by cutting lights apart where there are only has two wires, with the lights unplugged. Then, simply cap each of the two cut wires with a wire connector.

## How do you calculate the amount of light needed in a room?

Multiply width of room x length of room x 1.5 = amount of total minimum wattage needed (assuming an eight foot ceiling). Divide by 60 to get the number of 60-watt equivalent bulbs required. Then, add up the wattage in each bulb in each fixture to figure out how many light fixtures are needed.

## How many lights are needed in a room calculator?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens.

Key Terms.
Room Foot Candles Needed
Bedroom 10-20
Hallway 5-10
Bathroom 70-80

## What kind of Christmas lights do professionals use?

Commercial LED light strings with co-axial connectors are one of the most popular styles of commercial Christmas lights among professional installers due to their exceptional durability.

## How long is a 50 count string of Christmas lights?

Total length: 11.4 ft. 12 in. lead cord. Additional product features: Super bright bulbs.

## How many extension cords can you plug together for Christmas lights?

Follow the “rule of three”: String together no more than three sets of lights and plug no more than three sets of lights into one extension cord to reduce the risk of overheating. Turn off all decorative lights before you go to bed or leave your home.

## How many extension cords do I need for Christmas lights?

Two-wire extension cords are ideal for small appliances and are adequate for most indoor festive lights. Three-wire extension cords have a “ground” line and are safer for outdoor light displays. Make sure that the extension cord is suitable for the plug sockets in your home.

READ:  what does kristoff look like

## How many recessed lights do I need for a 10×10 room?

Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space.

## How many feet of LED lights strips do I need for my room?

The first LED strip light would be much brighter than the second. LED strip lights come in a wide range of colors as well as strips that can change colors.

A Guide on How to Buy LED Strip Lights.
Use Lumens Required Per Foot
Task lighting near source 250 to 450
Task lighting far from source 350 to 700
Indirect lighting 375 to 575
Signs 500 to 750

## What color light is best for kitchen?

Warm white
Warm white (3,000 to 4,000 Kelvin) is more yellowish-white. These bulbs are best suited for kitchens and bathrooms. Bright white (4,000 to 5,000 Kelvin) is between white and blue tones.

## What happens if you string too many Christmas lights together?

Because light strings have a maximum wattage capacity, which is why many string lights come with a little fuse just in case you connect too many together at once. The fuse is designed to blow so you don’t overload and damage your Christmas lights. … This happens when your wattage exceeds the amp capacity of the circuit.

## Can you string too many Christmas lights together?

Short Answer: Yes! The number of light strings that can be run in series is limited by the types of bulbs on the string, how much power they use, the length of the string, and the type/gauge of the wire used in the manufacture of the lights.

## How many strings of 100 lights can you connect?

For example, if you have a 15-amp circuit at home, that’s 1440 total wattages. For an average 10 watt incandescent string of lights, the formula is 1440/100= 14.4, which means you can string 14 strings of lights together. Compared to LEDs at 10 watts, it’s 1440/10=144, so you can string 144 strings of lights together.

## How many strings of lights do I need for a 6-foot tree?

“The average person usually has a 6-foot tree,” says prop stylist and crafter Karin Lidbeck-Brent. “So an easy, general rule to remember is that for each foot of your tree, you’d want to use one strand of lights.

## How many lights do I need for a 5ft Christmas tree?

We recommend as a guide you use approx 30 lights per foot in height of your Christmas Tree. For example, a 4ft. Christmas tree should have 120 Christmas tree lights, 5ft. tree 150 lights, 6ft tree 180 lights and a 7ft tree 210 lights.

READ:  what state has the highest incest rate

## How many lights do you need for an 8 foot tree?

“A good rule of thumb is 100 lights for every foot-and-a-half of tree,” according to Lowe’s. But Better Homes & Gardens recommends using three 100-light sets for every foot of a tree’s height. And Real Simple suggests 100 lights for every foot.

## How long is a string of 150 Christmas lights?

31ft
Light Count: 150 pcs. Power Source: Plug in. Intervals Between Bulbs: 2.4 inch. Lighted Length: 31ft.

## How long is a strand of 300 lights?

These fairy string lights are 61 FT long and have 300 mini bulbs you could plug it in and have you room shining.

## How much electricity do C7 Christmas lights use?

How Many Watts do Christmas Lights Use?
Bulb Type Wattage per Bulb Cost of Powering 10, 100-bulb strands (at avg. \$0.12/kWh)*
Incandescent C7 (2”) light 5 \$126.00
Incandescent C9 (3”) light 7 \$176.40
LED mini light .07 \$1.76
LED C9 (3”) light .09 \$2.27

## Do you start at the top or bottom when putting lights on a Christmas tree?

Plug in the lights to make sure all the bulbs are working. Starting at the top of the tree, intertwine the lights on top of and under branches. Work your way down and around the tree, hanging lights in the back as well. When you reach the bottom, hide any extra lights behind the tree.

## Are LED Christmas lights better?

LED Christmas lights use light-emitting diodes, rather than filament, to produce light. This makes LED lights more efficient, durable, and longer-lasting than fluorescent incandescent lights. They don’t burn out, like other bulbs; and they also don’t get hot to the touch, so they’re a lot safer, too.

## How many cluster lights do I need for a 6ft Christmas tree?

750 LED Lights are ideal for a 6ft tree, 1000 LED Lights are ideal for a 7ft tree, 1500 LED Lights are ideal for an 8ft tree, and 2000 LED Lights are ideal for a huge 10ft tree.

## How To Hang Exterior Christmas Lights

Related Searches

christmas light calculator
how to calculate how many christmas lights you need
how many christmas lights do i need for outside my house
best christmas lights for roofline
led christmas lights
home depot christmas lights
walmart christmas lights
christmas light sizes chart

See more articles in category: FAQs