How many zones surround your vehicle? The Zone Control System includes three steps.
Why are there six zones in the zone control system?
A zone control system consists of 3 basic components: thermostats, a control panel, and electronic dampers. Your home is divided up into different “zones,” decided upon by you and your HVAC technician. A thermostat is installed into each zone, and they are all wired into the central control panel.
What Is a Zone Control System? A zone control system typically refers to a system that allows you to simultaneously control the temperatures in different rooms or areas of your home.
There are six areas of space around a vehicle: front left, front, front right, rear left, rear, and rear right.
The first step in the Zone Control system is to use good searching strategies to find the LOS-POT blockages that will cause a zone closure.
How many zones surround your vehicle? The Zone Control System includes three steps.
What is the location of each of the six zones of the Zone Control System? straight ahead is the front zone, to the left is the left front zone, to the right is the right front zone behind you is the rear zone, the left rear zone, and the right rear zone. Explain what is meant by selective use of the IPDE Process?
Search. List the third of the Three Steps of Space Management: Execute. List the second of the Three Steps of Space Management: Evaluate.
open zone. a space where you can drive free of restrictions to your line of sight or path of travel. space cushion. area of space around the vehicle that is free of restriction, hazards, and conflicts when you use it. field of vision.
A “safety zone” is essentially a clearly marked area set aside for the use of pedestrians. Common examples include striped areas where passengers load and unload buses. A driver that violates Vehicle Code 21709 must pay a fine of $238.00.
The 2-second rule
The phrase takes about 2 seconds to say, so if you pass the same fixed point before you’ve finished saying it, you’re too close and should leave more room. In wet conditions, this gap should be at least doubled.
Your target area is the area 25-30 seconds ahead of you. Your path of travel is the section of roadway that will get you from where you are to your target area. Your line of sight is your ability to see the center of your path of travel from your car to your target area.
Why does the IPDE Process take time? … It takes time to identify, predict, decide, and execute correctly and safely. Complex traffic situations and the feelings and physical condition of the driver can cause the IPDE Process to take more time.
Tire tread wear in the center of the tread pattern tells you that the inflation patterns are too high. Too much pressure can cause the contact patch to shrink and the center of the tire to carry the entire load. Tire tread wear on the edges of a tire will typically indicate inflation pressures are lower than specified.
What is a changing zone? an open zone that may change to a closed zone.
The 4-6 second range is the space you will travel during the next 4-6 seconds. The area you can see clearly and sharply is seen with your central vision. The area you can see to the left and right of central vision is your side vision, or peripheral vision.
Closed Zone means any water area wherein the presence or operation of any recreational vessel is prohibited, and is marked as provided in section 1547.08 of the Revised Code.
How is your following distance determined? Counting seconds from when the driver in front of you passes an object until you pass it. The maximum speed you can travel and steer quickly out of the way is .
When utilizing the IPDE defensive driving strategy to manage space zones, a motorist should first identify objects in his or her line of sight and path of travel. The first space zone is directly above the vehicle.
If you stay in those blind spots, you block the trucker’s ability to take evasive action to avoid a dangerous situation. A truck’s blind spots are called No Zones. A No Zone is the area around the trucks where your car is no longer visible or you are so close that the truck can’t stop or maneuver safely.
Definition of safety zone
: a safety island for pedestrians or for street car or bus passengers.
When you’re driving, the one space you can completely control is the distance from your vehicle to the vehicle in front of you. This distance is known as your safety zone. It can give you a One Second Advantage™, not only in reacting to situations that arise in front of you, but around and behind you.
You may make a legal U-turn: Across a double yellow line when it is safe and legal. In a residential district if there are no vehicles approaching within 200 feet. Whenever a traffic sign, light, or traffic signal light protects you from approaching vehicles.
Related Searches
how many zones of space surrounding your vehicle are incorporated in the zone control system?
in the sipde system, when you execute a task what do you try to do?
how many steps are there in the smith system?
the sipde system is a ………… step process.
what is the location of each of the six zones of the zone control system?
in the sipde system, when you do a search you need to concentrate on with rapid glances to
in the sipde system, you concentrate on identifying moving objects, as they are the most dangerous
the 3 steps of zone control are find, solve and control.