It takes 27,154 gallons of water to irrigate one acre of land with an inch of water.
|Gallon (US) [gal (US)]||Acre-inch [ac*in]|
|1 gal (US)||3.68266E-5 ac*in|
|2 gal (US)||7.36532E-5 ac*in|
|3 gal (US)||0.0001104798 ac*in|
|5 gal (US)||0.000184133 ac*in|
|Gallon (US) [gal (US)]||Acre-foot [ac*ft]|
|1 gal (US)||3.0688832772166E-6 ac*ft|
|2 gal (US)||6.1377665544332E-6 ac*ft|
|3 gal (US)||9.2066498316498E-6 ac*ft|
|5 gal (US)||1.53444E-5 ac*ft|
A good place to start is to assume a requirement of one acre-inch of water per week for vegetable crops. This is the amount of water required to cover one acre with one inch of water, or 27,154 gallons. This inch includes any precipitation or irrigation applied throughout the week.
One acre-foot is the. amount of water it. would take to flood. one acre to a depth of. one foot.
* 1 acre-foot = 43,560 cubic feet. * 1 acre-foot = 325,851 gallons of water = 1233 cubic meters of water. * 1 acre-foot = 0.504 cfs/ day.
The simplest way to visualize an acre is as a square. In other words, the piece of land has the same length and width. Knowing that an acre has 43,560 square feet, that would mean that the land is approximately 208 feet long by 208 feet wide.
This is a square parcel of land 208.71 feet on each side. 6 city blocks = 1 kilometer. So 1 city block = 546.80665 feet. So an area approximately equal to 4 square acres = one square city block.
|SI units||≈ 1,233.5 m3|
|US customary units||43,560 cu ft|
|US customary units||≈ 325,850 US gal|
|Imperial units||≈ 271,330 imp gal|
One (1.00) inch of rain – A light moderate rain never reaches this amount, heavy rain for several hours (2-5 hours). There would be deep standing water for long periods of time.
How long do you need to leave the sprinkler in one spot? Water each section for 20-30 minutes so 1/2 inch of water is applied to each section. Do this 2 times a week. You could also water each section for an hour so 1 inch of water is applied to each section.
Why aren’t farmers being forced to cut back?
200 feet multiplying by 200 feet equal to 40,000 sq ft. Therefore, 40,000 sq ft divide by 43,560 sq ft equal to 0.92 acres approximately.
Alfalfa grown for forage in the arid Northwest normally requires from 1.8-acre feet (for 180-day growing season) to 3.2-acre feet (for 200-day growing season) of water. When irrigation sup- plies are limited, growers may want to alter their normal irrigation management.
lps – metric liters per second. 1 lps is about 16 gallons per minute.
|1 gallon =||0.2614 ft2||7.4805 gallon|
|6 gallon =||0.8633 ft2||109.9407 gallon|
|7 gallon =||0.9567 ft2||138.5412 gallon|
|8 gallon =||1.0458 ft2||169.2648 gallon|
|9 gallon =||1.1312 ft2||201.974 gallon|
For example, the average land value in California is $39,092 per acre. However, a 1.43-acre empty lot in Atherton, California (in Silicon Valley) was listed for a staggering $6.9 million in 2017.
So even in hilly terrain, the acre is measured as if the hill were cut off at the horizontal, parallel to the horizon. In practice, this means that property boundary lines are not measured as the true ground distance between two points on the ground, be they iron rods, stone bounds, or rock piles.
From Wikipedia, the free encyclopedia.
If you are attempting to figure the carrying capacity of land for a horse, then a good rule of thumb is 1-1/2 to 2 acres of open intensely managed land per horse. Two acres, if managed properly, should provide adequate forage in the form of pasture and/or hay ground. But this is highly variable depending on location.
Based on the average home sale, it’s definitely cheaper to buy your home rather than build it. On the other hand, the price per square foot is fairly comparable – it’s just that most people opting for new homes want larger homes.
how to calculate acre-feet of water
how many gallons in an acre inch of water
acre feet to million gallons
gallons of water per acre calculator
acre feet calculator
how many acre-feet of water does a household use
acre feet to billion gallons
acre feet to cfs